Sager » NP Series » NP4880

Sager » NP Series » NP4880 Hard Drive Replacement Guide

How to Remove Replace and Install Your Sager NP Series NP4880 Laptop Hard Drive

1. On the bottom of your Sager NP4880 laptop, find the hard drive door to access the hard drive.

2. Remove the Screws.

3. In this step, you will either need to pry out your Sager NP4880 hard drive caddy, or simply remove the door.

4. Once the Sager NP4880 hard drive is removed the laptop, you need to remove the hard drive caddy. There are usually four screws to remove from the caddy.

5. Simply Insert the new hard drive into the caddy. Place the screws back in. Install your new Sager NP4880 hard drive.